Choose Metek, you deserve better!

News

Introduction to Die Casting Mould

Die casting is an efficient metal forming process with little cutting and no cutting. Die casting is short for pressure casting. The molten liquid metal is injected into the pressure chamber of the die casting machine. Through the movement of the injection punch, the liquid metal fills the cavity through the mold gating system at high speed under the action of high pressure, and then crystallizes under pressure and rapidly cooling and solidifying to form the die casting.

  • 2605-2021

    Automobile casting process knowledge and its casting technology development trend

    Casting is one of the oldest metal forming methods. About 15%~20% of automobile parts are castings produced by different casting methods. These castings are mainly key parts of power system and important structural parts.

  • 2105-2021

    Introduction to Die Casting Mould

    Die casting is an efficient metal forming process with little cutting and no cutting. Die casting is short for pressure casting. The molten liquid metal is injected into the pressure chamber of the die casting machine. Through the movement of the injection punch, the liquid metal fills the cavity through the mold gating system at high speed under the action of high pressure, and then crystallizes under pressure and rapidly cooling and solidifying to form the die casting.

  • 1304-2021

    What is Aluminium Die Casting

    Aluminium Die Casting is one kind of method of metal processing. It generally uses the gravity of metal to casting in the mold. But aluminium die casting is not done by its own gravity but also with external pressure. That enhanced aluminium die casting parts own excellent performance in various industries. Such as copper, zinc, aluminium or aluminium alloy, which is heated to a liquid state, is poured into the inlet of the die-casting machine, and casting copper, zinc, aluminium or aluminium alloy parts with limited shapes and sizes of the mold, such parts are usually called die casting parts.

  • 0701-2021

    Unstoppable telemarketing skills

    At present, there is a serious "strange disease" in the telemarketing team, that is, "everyone should be motivated, everything should be motivated", without incentive, they are not willing to act, not enough incentive to create performance. More seriously, telemarketing managers encourage this "evil wind", engage in obvious violation of the rules and regulations of incentives, incentives that do not link with performance, incentives that kill the goose that lays the golden egg, incentives that rely too much on money, a variety of names, emergence in endlessly, in the long run, endless harm.

  • 0501-2021

    The basis for judging whether the foundry is professional

    First of all, we should look at the strength of the foundry equipment manufacturers, which can be judged from the history of the manufacturer, the manufacturer's reputation in the industry, the manufacturer's production scale, production capacity and other aspects, so as to sum up the strength of the foundry equipment manufacturers. Secondly, we should see the casting equipment manufacturers are good at which aspects of the casting, because the casting process is more, including steel castings, iron castings, stainless steel castings, precision casting, sand casting, resin sand casting, etc., some manufacturers of the process is more targeted, but some manufacturers are involved in a wider range.

  • 1001-2020

    Application fields and characteristics of aluminum alloy die castings

    Aluminum alloy die castings have a wide range of applications, good casting performance, high dimensional accuracy of castings, good surface roughness, good casting stability, high raw material recovery and utilization rate, easy to save production costs, high casting strength and surface hardness.

  • 1001-2020

    Air tightness testing of aluminum die castings

    Poor air tightness detection of aluminum die castings is that when a certain pressure is applied to the die casting, the pressure leaks from the inside or outside of the casting, which may manifest as oil leakage, gas leakage, water leakage, etc., which is one of the most difficult problems to solve in the defects of die casting First, the cause may be a combination of various defects.

  • 3105-2021

    The old-brand exhibition has a new trick-2021 China International Aluminum Industry Exhibition opens a new "aluminum" process

    The year 2021 is the beginning year of the 14th Five-Year Plan and the beginning year of China's new journey to build a modern socialist country in an all-round way. Thanks to the effective prevention and control of the epidemic in China, the continuous advancement of the "One Belt And One Road" strategy, the construction of a new development pattern of "domestic and international double cycle", and the "double carbon" goal of carbon peak and carbon neutral, China's aluminum industry has entered a new round of development cycle.

  • 1305-2021

    The rise of robots: three major trends in metal manufacturing

    Robots and artificial intelligence (AI) are at the heart of the new era of manufacturing and the driving force behind the development of digital industries. Robots and artificial intelligence are playing a universally important role in many industries -- improving accuracy and consistency, shortening production volumes, and improving product quality. A growing number of metal-manufacturing factories and laboratories are using robotics and artificial intelligence technology to improve efficiency and connectivity.

  • 2601-2021

    2021 China's mold market status and development trend forecast analysis

    The domestic die and mould industry as a whole maintains a healthy development trend In recent years, with the continuous development of China's manufacturing industry, the scale and comprehensive competitiveness of the domestic die and mould industry has made obvious progress.

  • 1501-2021

    On January 7th, the price of aluminum products of the Indian Aluminum Industry Corporation increased by 3000 rupees per ton

    Hindalco Industries Limited continuously raised the prices of its aluminum ingots and aluminum products, effective from Thursday, January 7. After raising the price of aluminum wire rod by Rs 2,750 per ton, or 1.53%, on January 6, the Indian Aluminum Industry Corporation further increased the price by Rs 3,000 per ton, or 1.64%, to Rs 185,600 per ton the next day.

Get the latest price? We'll respond as soon as possible(within 12 hours)

Privacy policy