Choose Metek, you deserve better!

  • 2605-2021

    Automobile casting process knowledge and its casting technology development trend

    Casting is one of the oldest metal forming methods. About 15%~20% of automobile parts are castings produced by different casting methods. These castings are mainly key parts of power system and important structural parts.

  • 2105-2021

    Introduction to Die Casting Mould

    Die casting is an efficient metal forming process with little cutting and no cutting. Die casting is short for pressure casting. The molten liquid metal is injected into the pressure chamber of the die casting machine. Through the movement of the injection punch, the liquid metal fills the cavity through the mold gating system at high speed under the action of high pressure, and then crystallizes under pressure and rapidly cooling and solidifying to form the die casting.

  • 1304-2021

    What is Aluminium Die Casting

    Aluminium Die Casting is one kind of method of metal processing. It generally uses the gravity of metal to casting in the mold. But aluminium die casting is not done by its own gravity but also with external pressure. That enhanced aluminium die casting parts own excellent performance in various industries. Such as copper, zinc, aluminium or aluminium alloy, which is heated to a liquid state, is poured into the inlet of the die-casting machine, and casting copper, zinc, aluminium or aluminium alloy parts with limited shapes and sizes of the mold, such parts are usually called die casting parts.

  • 0701-2021

    Unstoppable telemarketing skills

    At present, there is a serious "strange disease" in the telemarketing team, that is, "everyone should be motivated, everything should be motivated", without incentive, they are not willing to act, not enough incentive to create performance. More seriously, telemarketing managers encourage this "evil wind", engage in obvious violation of the rules and regulations of incentives, incentives that do not link with performance, incentives that kill the goose that lays the golden egg, incentives that rely too much on money, a variety of names, emergence in endlessly, in the long run, endless harm.

  • 0501-2021

    The basis for judging whether the foundry is professional

    First of all, we should look at the strength of the foundry equipment manufacturers, which can be judged from the history of the manufacturer, the manufacturer's reputation in the industry, the manufacturer's production scale, production capacity and other aspects, so as to sum up the strength of the foundry equipment manufacturers. Secondly, we should see the casting equipment manufacturers are good at which aspects of the casting, because the casting process is more, including steel castings, iron castings, stainless steel castings, precision casting, sand casting, resin sand casting, etc., some manufacturers of the process is more targeted, but some manufacturers are involved in a wider range.

  • 2512-2020

    High-Pressure Alloy Die Casting

    High-pressure aluminum and zinc die-casting is a metal casting process offered by Connor Corporation that is characterized by forcing molten metal under high pressure into a tool cavity. The tool cavity is created using two hardened tool steel dies, which have been machined into shape. Most automotive castings​ are made from non-ferrous metals, specifically zinc and aluminum alloys.

  • 2412-2020

    4 ELECTROPLATING METHODS OF ALUMINUM DIE-CASTING

    Phosphating is a process of forming a phosphate chemical conversion film by chemical and electrochemical reactions. The phosphate conversion film formed is called a phosphate film. The purpose of phosphating is: to provide protection to the base metal and prevent the metal from being corroded to a certain extent; for primer before painting to improve the adhesion and anti-corrosion ability of the paint film; to reduce friction in the metal cold working process Use for lubrication.

  • 2112-2020

    Die casting die design details of aluminum alloy shell worth a look!

    In this paper, the structure and die casting process of aluminum alloy shell are analyzed, and the die casting mold design of aluminum alloy shell is completed by UG software.It is proved by practice that the designed die casting is reasonable, the surface of the castings obtained is smooth and clean, and the product quality meets the requirements.

  • 1812-2020

    Looking ahead: Industry Trends in 2020

    To help foundry customers build growth strategies that meet the needs of their customers and the industry, Hangzhou Metek Machinery Co.,Ltd has shared the group's collective expertise on trends that will dominate the industry in 2020, and will continue to do so in the years ahead.

  • 1
  • 2
  • >
  • Total 18 Records
Get the latest price? We'll respond as soon as possible(within 12 hours)

Privacy policy